RATING OF FIBERS IN STEEL FIBER REINFORCED CONCRETE

Authors

  • Marek Ďubek Slovak University of Technology in Bratislava, Faculty of Civil Engineering, Radlinského 11, 81005 Bratislava, Slovakia

Keywords:

Steel fiber reinforced concrete, dispersion, evaluation

Abstract

Evaluation of dispersion fibers in steel fiber reinforced concrete (SFRC) is of great importance. Especially for production and processing of fiber-processing steps. The article is a comparison of current evaluation methods and developed an alternative proposal evaluation. Each figure for dispersion fiber has advantages but also its importance for practical usefulness. These data from different studies representing the fiber to a specific unit. For example, volume or area. Currently, the research focuses on equitable deployment of fibers of different successive steps of production. Before it is necessary to choose the most appropriate method of assessing or assemble a new one. The paper describes a new method for the evaluation of usable practice directly on site.

Metrics

Metrics Loading ...

References

Barbier, E.: 1860, Note sur le problème de l’aiguille et le jeu du joint couvert. journal de mathématiques pures et appliquées, p. 273-286. Available at:

http://portail.mathdoc.fr/JMPA/afficher_notice.php?id=JMPA_1860_2_5_A18_0.

Ďubek, M.: Digitálne možnosti overovania homogenity rozptýlených vlákien vo vláknobetóne. In: Juniorstav 2013 [elektronický zdroj] : 15. odborná konference doktorského studia s mezinárodní účastí. VUT, Brno,: Vysoké učení technické v Brně, (2013). - ISBN 978-80-214-4670.

Ferrara, L. - Ozyurt, N. - Prisco, M.: High mechanical performance of fibre reinforced cementitious composites: the role of ‘‘casting-flow induced’’ fibre orientation, RILEM, Materials and Structures, 2011.

Gettu, R. - Gardner, D.R. - Saldivar, H. - Barrgán, B.E.: Study of the distribution and orientation of fibers in SFRC specimens, RILEM, Materials and Structures 38, 2005.

Kalousová, A.: 2009, Počátky geometrické pravděpodobnosti a stereologie, Praha, Available at: http://math.feld.cvut.cz/0rese/kolokvia/prezentace/MK_240409_kalousova.pdf.

Krátký, J. - Trtík, K. - Vodička, J.: Drátkobetonové konstrukce. Praha: EBS, 1999. ISBN: 80-86364-00-3.

Priechodský, V.: Stanovenie množstva oceľovej rozptýlenej výstuže v betóne, Fakulta STU, In: Betonárske dni 2004 : Zborník prednášok konferencie, Bratislava, 9.-10.9.2004: - S. 247-252.

Stähli, P.: Ultra-Fluid oriented Hybrid-Fibre-Concrete, Dissertation thesis, Swiss Federal Institute of Technology Zurich, Switzerland (2008) ISBN 978-3-9523454-0-5.

Vlasák, O.: Kontrola množství drátků v betonové směsi na stavbách průmyslových podlah z drátkobetonu, (2009). Available at: http://www.imaterialy.cz/Materialy/Kontrola-mnozstvidratku-vbetonove-smesi-na-stavbach-prumyslovych-podlah-zdratkobetonu.html.

STN EN 14889-1 Vlákna do betónu. Časť 1: Oceľové vlákna. Definície, špecifikácie a zhoda.

STN EN 14845-2 Skúšobné metódy pre vlákna v betóne. Časť 2: Účinok na betón.

STN EN 14721+A1 Skúšobné metódy na betón

Downloads

Published

2016-12-31

How to Cite

Ďubek, M. (2016) “RATING OF FIBERS IN STEEL FIBER REINFORCED CONCRETE”, Czech Journal of Civil Engineering, 2(2), pp. 36-41. vailable at: https://cjce.cz/journal/article/view/86 (ccessed: 23April2024).

Issue

Vol. 2 No. 2 (2016)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Public License

Articles published in Czech Journal of Civil Engineering are licensed using Creative Commons License. Except where otherwise noted, individual articles in the Czech Journal of Civil Engineering are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).